时间：2019-10-26 点击：740次
HiComp Centrifugal biochemical diagnostic microfluidic chip.
The chip integrates core technologies such as reagent freeze-drying, centrifugal
microfluidic disk design, precision injection molding and high-throughput detection.
The chip has a unique microfluidic structure designed to automatically and rapidly
separate the plasma from the blood cells. Allows the direct detection of the whole
blood sample.
The chip integrates core technologies such as reagent freeze-drying, centrifugal
microfluidic disk design, precision injection molding and high-throughput detection.
The chip has a unique microfluidic structure designed to automatically and rapidly
separate the plasma from the blood cells. Allow the direct detection of the whole
blood sample.
13 biochemical indicators were detected at the same time,
and the reagents applied microsphere freeze-drying technology.
Centrifugal biochemical diagnostic microfluidic chip can detect 30 biochemical indicators in
the future, such as Triglyceride, Alkaline phosphatase, globulin and so on.
Microfluidic chip design:
Single detection sample volume 15ul,( Microliter)
Pre-embedded buffer volume 400ul,
Total sample volume 70-120ul.
Microsphere freeze-drying:
The single reagent is a 2.7mm diameter microsphere,
Accurate quantification, microsphere deviation <1%.
13 biochemical reagents.
Rapid dissolution and activation.
It is divided into buffer zone, plasma zone, volume-constant zone, mixed zone and detection
zone.
Microfluidic centrifugal biochemical detection platform.
Only one drop of blood is needed to detect 13 biochemical indicators, and the clinical trials
have been completed. This test is low in cost, accurate in results, quick and convenient.
Turn on the power switch and wait for about ten seconds until the main screen is displayed
on the screen.
Scan the disc with the barcode scanner, and the instrument automatically reads relevant
information.
Uncover the protective film.
Use a pipette to add the sample and buffer.
Place the disc on the tray and click the OK button.
The detector starts to work and the sample begins to be centrifuged.
Plasma enters the mixing zone and quantitatively separated after mixing with the diluent and
then reacts with pre-embedded reagents.
When the test is completed, the built-in thermal printer automatically prints the test result.
Founded in 2014, HiComp is your comprehensive lab-on-a-chip product development and
manufacturing partner, providing custom solutions for applications in immunology, clinical
chemistry, DNA sequencing and cell manipulation.
Microfluidics is a revolutionary next-generation diagnostics technology with six technological
advantages.
