重庆配音公司

　　X CUBE II Video Tutorial

　　The X CUBE II from SMOK is one of the most hi-tech vaping devices ever made.

　　It features 160 watts of maximum output, temperature control mode, wattage memory mode and

　　Bluetooth 4.0 technology. All these are designed to bring you unmatched safety, performance and

　　upgradability.

　　This video tutorial will go through some main features, as well as basic operating instructions of

　　the X CUBE II.

　　Ok, here we go!

　　Firstly, let’s add some e-liquid to the TFV4 Tank.

　　Don’t need to screw it off, you just press the top cap and move it counterclockwise.

　　Top refill e-liquid through the slot, and pay attention not to drip it into the central airflow tube.

　　Close the cap carefully and firmly.

　　And then press the firing bar five times in succession to power on X CUBE II.

　　The display should light up, and present all the important information.

　　The X CUBE II also features a variety of shortcuts. Those are designed to save your time and

　　effort.

　　 1. Press the firing bar lightly and quickly to switch between menus.

　　 2. Press and hold down the firing bar to access to submenu or exit menu.

　　 3. Press the - button and the + button at the same time to turn Bluetooth on or off.

　　 4. Press the firing bar and the – button at the same time to switch between “WATT MODE”,

　　 “TEMP MODE” and “MEMORY MODE”.

　　 5. Press the firing bar and the + button at the same time to switch between “SOFT”,

　　 “NORM” and “HARD” draw effects.

　　In addition to these, there are other 6 shortcuts that can be enabled when the mod is locked. To

　　lock the mod by pressing the firing bar five times.

　　 1. Press the - button and the + button at the same time to show puff number and time.

　　 2. Press the firing bar and the + button at the same time to turn stealth mode on or off.

　　 3. Press the firing bar and the – button at the same time to turn LED light on or off.

　　 4. Keep holding the + button to show current date.

　　 5. Keep holding the – button to show current time.

　　 6. Keep holding the firing bar and select OFF to turn power off.

　　Next, we are going to talk about the temperature control function of X CUBE II.

　　SMOK’s temperature control technology requires your coils made from Ni200 alloy, because the

　　resistance of Nickel can significantly change with its temperature. And X CUBE II uses the

　　resistance of the atomizer to calculate the temperature of the heating coil.

　　If you are using temperature control mode, be careful to only attach new atomizers that have

　　cooled to room temperature to the device. If a new atomizer is attached to the X CUBE II before it

　　has cooled down, the temperature may read and protect incorrectly until the new atomizer cools.

　　And it’s important to know when using a new atomizer or reconnect your existing atomizer under

　　temperature mode, the X CUBE II will prompt” IS NEW COIL? Y/N”. If you have attached a new

　　atomizer, please choose Y, if you just disconnect and reconnect your existing atomizer, please

　　choose N.

　　Now, lets do a tissue burn test to see how the temperature control function works.

　　Here we have a nickel build on a TFV4 RBA and a strip of tissue.

　　I’m going to burn the tissue at 300, 400, 500 and 600 degrees Fahrenheit respectively, and each

　　for 10 seconds.

　　Let’s watch what will happen.

　　1,2,3,FIRING

　　All right, now we can see 4 shades of yellow on the tissue, which indicate different degrees of

　　 burns. And that provides a vivid explanation of how effectively the X CUBE II can regulate the

　　 heating coil temperature.

　　As a hi-tech Bluetooth mod, the X CUBE II uses Bluetooth 4.0 which requires very little energy,

　　and extents the range.

　　You can download our app, Smart BEC for Android and iOS (Google Play/App Store).

　　It is applicable to Android 4.3+ and iOS 7.0+ systems, so make sure your phone operating system

　　is updated.

　　Before connecting the app with X CUBE II, please make sure the Bluetooth of your Smartphone

　　and the mod is active.

　　After launching the app, it should search for the X CUBE II spontaneously.

　　Press the icon of X CUBE II to pair. Then it will prompt to enter a password, and our initial

　　password is 000000.

　　With the app, operation will be much easier and more convenient.

　　We hope you find it helpful and also hope you enjoy using your X CUBE II power device, and

　　other products from SMOK.