配音招募佐助配音

　　With a compact and light design, the installation and removal of TCL Window air

　　conditioners in many areas of your home are easy. Let us show you how!

　　Please take out the unit and parts from the carton and familiarize yourself with them

　　before installation.

　　Step 1: Use four included 3/8 inch screws to fasten the top mounting rail to the unit.

　　Step 2-Fasten the accordion styled window panel expander pieces to the unit. Pull the

　　leading edge of them to its maximum width. Then slide the panel expanders into the

　　grooved notches (slide downward) on the sides of the air conditioner and make sure they

　　are inserted into the metal rails tightly. Repeat the process for the other side.

　　Step 3: Carefully place the window air conditioner into the window where it is to be

　　installed. close the window securely. The air conditioner should be slightly tilted to the

　　outside area to allow water to drain out from the unit.

　　Step 4: Fasten the window air conditioner to the window frame using the included 1/2

　　inch screws. Fasten each of the panel extenders (Left and Right) to the unit, using a 1/2

　　inch screw. You may need to drill a pilot hole in the window frame to fasten the screws to

　　the window sash.

　　Step 5 : Attach the frame locks between the panel extender and window sill and fasten

　　them together with an included 3/4 inch locking screw. Repeat for each side. You may

　　need to pre-drill pilot holes to complete this step.

　　Step 6: Attach a sash lock between the top of the sliding window and window frame using

　　an included 3/4 inch screw to secure the window closed.

　　Step 7:To prevent air or other small objects from entering, insert the cut sash seal

　　(included) to the width or gaps in the windows.

　　Step 8. Remove the plastic from the cord and plug the unit into a 15 A, 115 V grounded

　　receptacle.

　　Press the COOL button to enter COOL mode and position the 8 way direction air vents

　　for your comfort.

　　Turn on the unit by rotating the mode dial to desired setting.

　　Your TCL unit has 2 fan speeds, 2 cooling modes and 7 thermostat settings. You can

　　choose the larger snowflake icon for stronger cooling. #7 marks the highest fan speed.

　　Refer to your owner’s manual for additional operating instructions.

　　For Fan only mode The AC will not be cooling the room in fan mode.

　　The air filter should be cleaned every two weeks to ensure the unit operates efficiently.

　　The filter can be removed by sliding the filter out from the right side of the grill area.

　　Wash in warm soapy water and dry it before re-installing.

　　When the season is over or when the unit will not be used for a long time , carefully

　　remove the unit from the window following the instruction in the owners manual. Wipe

　　the unit down, clean the air filter and store all parts and the window air conditioning

　　unit in the original box.

　　With these simple steps to install, remove and maintain your unit, you enjoy many years

　　of service from your TCL air conditioner. Thank you for purchasing a TCL air conditioner

　　and welcome to the TCL family.