如何给视频配音

　　

　　KOOPOR mini

　　 Constructed from stainless steel with a zinc-alloy coating, KOOPOR mini looks modern and

　　compact. The out shell is cut at an elegant 45 degree angle, which really does feel better in the

　　hand.

　　 High-quality OLED display is easy to read. One side and bottom of the box are full of

　　venting holes to prevent the mod from overheating. The KOOPOR mini takes a replaceable 18650

　　battery and the magnetic battery cover can easily slide off.

　　 KOOPOR mini is designed with style, ease of use in mind without sacrificing performance.

　　 Featuring 60 watts of maximum output, and new functions of temperature control technology,

　　KOOPOR mini is a remarkable box mod.

　　 Now, let’s go through these main features, as well as some basic operating instructions of

　　KOOPOR mini.

　　 Attach the SMOK TFV4 tank with TF-N2 CORE, firstly.

　　 Fast press the KOOPOR button five times, the display should show

　　"WELCOME", "KOOPOR" and "KP60" successively. And then fast press the KOOPOR button

　　three times to enter into the menu interface.

　　The first one is Working Mode menu

　　There are two modes: temperature control mode and variable wattage mode.

　　To adjust the temperature up:

　　Simply press the up button once to adjust temperature up in 10 or 5 degree increments.

　　You can also hold the up button to continuously adjust the KOOPOR mini up.

　　The KOOPOR mini can be adjusted from 200 to 600 degrees Fahrenheit (or from 100 to 315

　　degrees Celsius).

　　To adjust the temperature down works the same way, only you will go to use the down button.

　　The second is Coil Material Selection menu

　　You can select your coil material is Nickel 200 or Titanium.

　　The third is Special Draw Effects menu

　　There are three modes: SOFT, NORM and HARD.

　　Another two menus about temperature control are:

　　The seventh menu: Adjustable Nickel TCR (Temperature Coefficient of Resistance)

　　It can be adjusted from 0.0040 to 0.0080 by pressing up or down button.

　　The eighth menu: Adjustable Initial Resistance

　　It is designed to ensure your resistance on the load remains the same. And the adjustable range is

　　±50 mΩ (±0.05 Ω).

　　In order to show you guys how the temperature control function works, we are going to do two

　　tests.

　　First is the organic cotton burn test.

　　Here we have a nickel build on a TFV4 RBA from SMOK and a strip of cotton.

　　I’m going to burn the cotton at 300 and 600 degrees Fahrenheit respectively, and each for 10

　　seconds. Let’s watch what will happen.

　　Burn the cotton at 300 degrees Fahrenheit, it doesn’t burn.

　　Next, burn it at 600 degrees Fahrenheit, the result is the same.

　　Those provide a vivid explanation of how effectively the KOOPOR mini can regulate the heating

　　 coil temperature.

　　Another test is using professional equipment, the oscilloscope to show the real time temperature

　　changes of KOOPOR mini and another common box mod in the market.

　　Both attach SMOK TFV4 tank with the same TF-N2 CORE.

　　Firstly, we attach KOOPOR mini to the scope, and its temperature signal shows at the top of the

　　screen, it’s yellow.

　　Then, we attach the other mod to the scope, and its temperature signal shows at the bottom of the

　　screen, it’s blue.

　　Ok, here we go, fire these two box mods at the same time, last for 10 seconds.

　　From the scope we can see that both signals fluctuated at the beginning and then became almost

　　flat.

　　Now, we zoom in on the signals. The blue one shows rectangular pulse, while the yellow one is

　　relatively flat, fluctuates within a narrower range and not obvious rectangular pulse.

　　Thus it proves that the KOOPOR mini is performing better on temperature control.

　　Now, let’s go back to the rest menus:

　　The fourth is standby time setting, it can be adjusted from 5 seconds to 240 seconds.

　　The fifth is puff counter clearing, it will prompt “PUFFS RESET Yes/No”, choose Yes to clear.

　　The sixth is screen rotation, you can flip the display to LEFT or RIGHT by pressing up or down

　　button.

　　The KOOPOR mini also features a variety of shortcuts. Those are designed to save your time and

　　effort.

　　When the mod is Unlocked:

　　1. Press UP and DOWN Button simultaneously to lock both UP and DOWN Button to avoid

　　accidental operation. And then press both buttons simultaneously to unlock.

　　2. Press KOOPOR and UP Button simultaneously to switch working mode between TC Mode and

　　VW Mode;

　　3. In the TC Mode, Press KOOPOR and DOWN Button simultaneously to switch between

　　different draw effects: SOFT / NORM/ HARD.

　　When the mod is Locked (fast pressing the KOOPOR button five times to lock):

　　1. Press the KOOPOR and UP Button simultaneously to flip the screen to left;

　　2. Press the KOOPOR and DOWN Button simultaneously to flip the screen to right;

　　3. Hold the KOOPOR Button for 8 seconds to power off.

　　You can also enter the ninth menu to choose “Power off” option to turn KOOPOR mini off.

　　(Note: Without operation for 5 minutes, the KOOPOR mini will go into sleep mode automatically.

　　You need to reactivate it for using again)

　　六、结束（网址，配音秀配音秀配音秀配音秀社交网络账号介绍等）

　　This concludes the video tutorial of KOOPOR mini.

　　We hope you found it helpful and also hope you enjoy using your KOOPOR mini power device.

　　Follow us on Twitter or Facebook to get the latest e-cig news and more!